How to Perform a Manual Reboot of Your UltraNEXUS-HD

Three different methods you can perform to reboot your UltraNEXUS-HD manually

There are three ways to reboot the UltraNEXUS-HD:

1. In WinLGX, go to the Tools menu, select Controller, and click the Reboot button at the bottom of the window.

2. In the WebNEXUS browser interface, go to the System Settings page, then to the Maintenance tab, and click the Reboot button.

3. From the front panel (making sure you are at the date and time display), press and hold the green check button for about eight seconds, then release. (on an UltraNEXUS-HD Blade, press the joystick straight in). When the date and time appear, the reboot is complete.